Back to blog

California SB 20 puts silica duties for stone slab fabrication into the Labor Code

California SB 20 bans dry cutting for silica trigger tasks, adds silicosis to serious illness reporting and requires annual Cal/OSHA training attestations.

November 18, 2026

California’s Labor Code bans dry methods for cutting, grinding, polishing and other fabrication work on silica-containing stone slabs. Senate Bill 20, Chapter 734 of the Statutes of 2025, added that prohibition. It was approved and filed on October 13, 2025 and took effect on January 1, 2026. The same law adds silicosis and silica-related lung cancer to the Labor Code’s definition of a serious injury or illness, and requires fabrication shops to file a training attestation with Cal/OSHA every year starting July 1, 2026.

The California SB 20 artificial stone tracker record lists each new Labor Code section with its start date.

Which tasks the statute covers

SB 20 attaches its duties to high-exposure trigger tasks. New Labor Code section 6359.1(g) defines them as machining, cutting, grinding, drilling, polishing and similar work on artificial stone containing more than 0.1 percent crystalline silica by weight, or on other materials, including natural stone, containing more than 10 percent. Cleanup and handling of the resulting dust, waste and debris also count. The definition only reaches the fabrication of countertops, backsplashes, walls, flooring, waterfall edges and other products made from slabs or panels.

Those material percentages decide which tasks are covered and set no airborne limit. Fired ceramic and porcelain tiles and panels fall outside the statute’s definition of artificial stone. The fabrication shop definition excludes quarries, concrete and cement manufacturing facilities, and fired ceramic or porcelain tile and panel plants that do not manufacture, fabricate or finish artificial stone.

What SB 20 requires

  • Wet methods for every trigger task. Section 6359.1.5 prohibits dry methods and requires effective wet methods. The statute accepts constant running water applied directly to the work surface, submersion, or water jet cutting, with water covering the whole surface where the tool meets the piece and exposures kept from exceeding the action level at any time. Recycled water must be filtered before reuse. A violation is grounds for an immediate Cal/OSHA order to stop the work.
  • Serious illness reporting. Section 6302(h) now includes silicosis and silica-related lung cancer in the definition of serious injury or illness. Cal/OSHA’s 2026 silica employer fact sheet says employers must report these illnesses to Cal/OSHA immediately once they know, or should know, that the illness is work-related.
  • Training and an annual attestation. Under section 6359.2, the owner or operator of a fabrication shop, and anyone who employs others to perform trigger tasks in a shop, must train those employees under section 5204 of Title 8. Beginning July 1, 2026 and every year after, they must submit an electronic written attestation to Cal/OSHA that each of those employees was trained. A false attestation is unlawful. The fact sheet says attestations are filed through Cal/OSHA’s Silica Training Attestation Portal.
  • Agency case reporting. Section 6359.4 requires the California Department of Public Health to report artificial stone silicosis cases to Cal/OSHA within three business days. Each report counts as a complaint of a serious violation, and Cal/OSHA must start an investigation within three business days.

How SB 20 fits with section 5204 and the draft prohibition

SB 20 sits on top of section 5204, California’s permanent silica standard, and points to that standard for its training content. APT’s article on California’s permanent silica rule covers the regulation’s own trigger-task monitoring, control and respirator requirements. The statute’s text contains no shop certification program and no ban on selling artificial stone.

A separate Cal/OSHA discussion draft on prohibiting high-silica artificial stone would go further by banning the manufacture and fabrication of slabs or panels with 1.0% or more crystalline silica. That draft has not been adopted. SB 20 duties apply now regardless of how the draft proceeds.

Records worth checking

APT’s practical interpretation is to confirm the silica content of each slab product in use against the 0.1 and 10 percent thresholds, since that decides which tasks are covered. Each trigger task, including cleanup, should use one of the listed wet methods with continuous water coverage. Training records for every worker who performs trigger tasks should be complete enough to support the yearly attestation.

Because the statute defines effective wet methods by reference to the action level, exposure monitoring results for trigger tasks are the most direct record that a wet method is working.

California’s permanent standard, SB 20 and the draft prohibition each have their own entry in APT’s industrial hygiene regulatory tracker.

Get regulatory news updates

Receive updates on industrial hygiene and workplace exposure regulations in the US, Canada, and Australia.

Take a tour of APT's dust management platform

Vulcan Materials Company is the nation’s largest producer of construction aggregates.

Project partner

Brent Leclerc | Environmental Manager

Problems solved

Unjustified community dust complaints & lawsuits

Difficulty complying with opacity regulations and risk of NOVs

Solution

Real-time dust monitoring

Dust maps proving no community impact, preventing fines & lawsuits

Real-time opacity monitoring, high degree of compliance

Case study overview

Share this article

Better decisions start with real-time insight

APT helps industrial teams move faster, act smarter, and stay compliant—because when you can see the problem clearly, you can solve it confidently.