November 18, 2026
Section 8.39 of British Columbia’s Occupational Health and Safety Regulation no longer says that a worker must be clean shaven where a respirator seals with the face. Since November 6, 2026, the section defines a tight-fitting respirator as one that needs an effective seal with the face to work properly. It then requires the employer not to permit anything to interfere with the seal or proper functioning of that respirator. WorkSafeBC’s update notice identifies the amending regulation as B.C. Reg. 135/2026. The same regulation brings the fit-test and user seal check sections, 8.40 and 8.41, into line with the new term.
WorkSafeBC’s announcement says the amendments clarify existing requirements and do not introduce new requirements for employers or workers. APT’s B.C. respirator face seal record sets the former and current wording side by side.
Former and current wording
The former section 8.39 had two subsections. The first barred anything that intruded between the facepiece and the face or interfered with the seal, except specialty eyewear approved by the Board for positive pressure full facepiece respirators. The second required a clean-shaven face where the respirator seals. The current Part 8 text has the definition and a single interference rule, with no eyewear exception.
The fit-test triggers in section 8.40 were already in the regulation and are unchanged. A fit test is still required before first use, at least once a year, after a change of facepiece brand, model or size, and after a change in the user’s physical condition that could affect fit. Fit tests still follow CAN/CSA-Z94.4-02.
Respirator selection (s. 8.33) and user seal checks (s. 8.41) cite the 2018 edition, CAN/CSA-Z94.4-18. Those references come from an earlier amendment, B.C. Reg. 229/2025, which updated respirator and safety headgear standards on April 1, 2026.
Facial hair and other program questions
The WorkSafeBC pages reviewed for this article do not mention facial hair directly. APT’s reading is that facial hair under the sealing surface still counts as interference, because the rule bars anything that interferes with the seal and WorkSafeBC says no new requirements were added.
APT’s practical interpretation is to update written respirator programs to use the tight-fitting respirator term and keep the rule on seal interference in place. A program that relied on the former eyewear exception should be checked against the current wording. Procedures should cite the edition named in each section, which is the 2002 edition for fit testing and the 2018 edition for selection and seal checks.
Part 31 was not part of this amendment. Section 31.22 of the firefighting part still requires firefighters who use self-contained breathing apparatus to be clean shaven. Mines regulated under the Mines Act follow the Health, Safety and Reclamation Code and are outside this change.
Ontario’s 2026 respirator approval amendments and other respiratory protection records are in the industrial hygiene regulatory tracker.
Get regulatory news updates
Receive updates on industrial hygiene and workplace exposure regulations in the US, Canada, and Australia.
Take a tour of APT's dust management platform

Vulcan Materials Company is the nation’s largest producer of construction aggregates.

Project partner
Brent Leclerc | Environmental Manager
Problems solved
Unjustified community dust complaints & lawsuits
Difficulty complying with opacity regulations and risk of NOVs
Solution
Real-time dust monitoring
Dust maps proving no community impact, preventing fines & lawsuits
Real-time opacity monitoring, high degree of compliance
Better decisions start with real-time insight
APT helps industrial teams move faster, act smarter, and stay compliant—because when you can see the problem clearly, you can solve it confidently.
