Back to blog

MSHA preserves existing mine standards during silica-rule delay

MSHA says it will keep enforcing existing metal and nonmetal mine standards while the Eighth Circuit stay of the 2024 silica rule deadlines lasts.

October 7, 2026. Updated November 18, 2026.

MSHA’s April 6, 2026 notice indefinitely delayed the conforming amendments to its metal and nonmetal mine standards because a court had stayed the 2024 silica rule’s compliance deadlines. The published notice says MSHA will keep enforcing the existing standards until that stay ends.

APT’s MSHA silica rule stay tracker record lists the stayed 2024 requirements beside the standards MSHA says it enforces now.

The amendments and the earlier rule are separate

The notice concerns changes to 30 CFR parts 56 and 57 that were scheduled to take effect on April 8, 2026. It names sections 56.5001, 56.5005, 57.5001 and 57.5005 as the existing standards MSHA will continue to enforce until the court-ordered stay is terminated and there is a resolution on how to proceed. MSHA says it will announce further action in the Federal Register once the stay ends. The eCFR, up to date as of November 16, 2026, still marks the part 56 conforming amendments as delayed indefinitely.

What the court order and docket show

The Eighth Circuit’s April 11, 2025 order in the consolidated petitions, Nos. 24-1889, 24-2661 and 24-2663, granted a stay of the silica rule’s compliance deadlines until the court completes a substantive review of the petition. The same order held the cases in abeyance and asked the parties for status reports. CourtListener publishes copies of the order and of the court’s docket. In the docket copy last updated on November 11, 2026, no later order ends the stay, and the most recent entry, dated October 13, 2026, asks for the next status report by December 8, 2026.

MSHA’s November 12, 2026 proposal describes the same order and says that, in accordance with it, MSHA continues to pause enforcement of the 2024 rule’s requirements for mine operators. The proposal gives the original compliance dates as April 14, 2025 for coal operators and April 8, 2026 for metal and nonmetal operators, and its regulatory text sets no replacement dates. The proposed revisions have their own MSHA silica proposal tracker record.

Keep the applicable standard attached to each assessment

APT’s practical interpretation is that mine exposure records should keep the existing standards separate from the part 60 requirements in the stayed rule. A compliance calendar built on the original April 2025 and April 2026 dates could show obligations as overdue while those deadlines are stayed. The proposal keeps the 50 µg/m³ permissible exposure limit and 25 µg/m³ action level but would change sampling, respiratory protection and medical surveillance provisions, so plans written around the 2024 text may need revising if it is finalized.

Find related developments in the industrial hygiene regulatory tracker.

Get regulatory news updates

Receive updates on industrial hygiene and workplace exposure regulations in the US, Canada, and Australia.

Take a tour of APT's dust management platform

Vulcan Materials Company is the nation’s largest producer of construction aggregates.

Project partner

Brent Leclerc | Environmental Manager

Problems solved

Unjustified community dust complaints & lawsuits

Difficulty complying with opacity regulations and risk of NOVs

Solution

Real-time dust monitoring

Dust maps proving no community impact, preventing fines & lawsuits

Real-time opacity monitoring, high degree of compliance

Case study overview

Share this article

Better decisions start with real-time insight

APT helps industrial teams move faster, act smarter, and stay compliant—because when you can see the problem clearly, you can solve it confidently.